About the Journal

The American Academic Scientific Research Journal for Engineering, Technology, and Sciences is an open access International Journal for scientists and researchers to publish their scientific papers in all main branches of science ( All scientific disciplines) such as Social Sciences , Natural Sciences , Formal Sciences, and Applied science. International availability for author's scientific Papers can be achieved by Indexing, Abstracting, and Listing their papers. The Academic Scientific Research Journal for Engineering, Technology, and Sciences is serving as a new online journal medium for the international scientific community and research centers. 

This Journal is published by Mohammad Nassar for Researches (MNFR);  MNFR company is registered in Jordan (Hashemite Kingdom of Jordan) under the number 330811, the company national number is 100439452.

This page covers the following topics for authors:

Mission & Vision


Excellence in publishing quality scientific research papers and leadership at the international level.


The journal is keen to be a center for publishing and promoting knowledge and scientific research at the international level.

Focus and Scope

The American Academic Scientific Research Journal for Engineering, Technology, and Sciences intended to publish original research papers not previously published, that is not being considered elsewhere for publication in all main branches of science ( All scientific disciplines).

Indexing and Abstracting

Click to find the Indexing and Abstracting for the journal.

Processing Charges ( Fees)

The fees structure for this journal:

  • submission fees: we do not charge any submission fees
  • editorial processing charges: we do not charge any editorial processing charges.
  • article processing charges (APCs): (105 USD).
  • page charges: if the paper exceeds 30 pages then the author will be asked to pay 5 USD/page for each page after 30 pages. 
  • colour charges: we do  not charge any colour charges fees.

Peer review process and results excepted time is 4 Weeks. 

Choose the Correct Option then Pay your Paper Publication Fees Using Paypal: 

Note: PayPal is the safer, easier way to pay. You can use your credit card (including Visa, MasterCard, American Express, Discover, JCB, Diner's Club and EnRoute.) without exposing your account numbers. PayPal is available in 203 countries around the world; check your country using the following link https://www.paypal.com/en/webapps/mpp/country-worldwide?locale.x=en_JO

paper publication fees options in USD

Note: This Journal provide other payment methods Such as (Bank to Bank transfer, and Shift Mony, etc..) when PayPal is not available or not possible for authors.

Note: you can Also pay directly to the following email moanassar@yahoo.com using paypal website: https://www.paypal.com/

Author Registration and Submission Guidelines in the Journal

To submit paper to ASRJETS journal; Authors should register themselves as authors using ASRJETS open journal system (ASRJETS OJS) using the following registration page. For already registered users; they should login to the journal and begin the five-step process to submit their papers. Authors can send the paper directly by email using editor@asrjetsjournal.org

Registration Note:

      • Please add the email address editor@asrjetsjournal.org in your Email address book so that the messages from Editorial Office do not end up in your spam without you knowing it.

Manuscript Structure:

  • Submitted manuscripts to the journal should use the following template (download the template).
  • The manuscript should be in English.
  • The manuscript should be arranged as follows:

1- Title page. This should contain:

  • a concise and informative title (as short as possible).
  • a list of authors' names.

2- Abstract: the abstract should convey the following information:

  • The purpose of the project .
  • The research problem.
  • The methods used to address this research problem.
  • The conclusions reached.
  • The significance of the research project.

 3- Key-words. A list in alphabetical order not exceeding 8 words or short phrases.

4- Introduction: The function of the Introduction is to:

  • This is accomplished by discussing the relevant primary research literature (with citations) and summarizing our current understanding of the problem you are investigating;
  • State the purpose of the work in the form of the hypothesis, question, or problem.
  • Briefly explain your approach in solving the problem of the research.

5- Materials and methods: you explain clearly how you carried out your study.

6- Results: State the results and draw attention to important details.

7- Discussion: Point out the significance of the results in relation to the reasons for doing the work.

8- Conclusion: state the implications of the answers your results gave you.

8- Citations and References: this journal uses the IEEE Citation Style. (download detailed instructions)

Order Hard Copies of the Journal

Hard copies are available; we have the following options:

  •  2 distribution copies (each copy contains the author paper only + table of contents + journal's cover) -- cost is 64 USD + transfer fees.
  •  1 full volume copy + 1 distribution copies -- cost is 119 USD + transfer fees.
  •  1 full volume copy -- cost is 105 USD + transfer fees.
  • Note: The delivery depends on the chosen option and on the volume in which the paper is published (between 20-60 days).
  • Note: the fees also cover any costs related to the delivery of the hard copies to the author by postal office. 

Author Downloads

Authors can download the following files:

Article Correction and Retraction Policy

Corrections to the published papers are possible under the certain circumstances. In very rare circumstances, the American Academic Scientific Research Journal for Engineering, Technology, and Sciences also reserves the right to remove articles, kindly read the following details:  

1.   Errata 

Errata concern the amendment of mistakes introduced by the journal in editing or production, including errors of omission such as failure to make factual proof corrections requested by authors within the deadline provided by the journal and within journal policy. Errata are generally not published for simple, obvious typing errors, but are published when an apparently simple error is significant (for example, a greek mu for an 'm' in a unit, or a typing error in the corresponding author's email address). If there is an error in a figure or table, the usual procedure is to publish a sentence of rectification. A significant error in the figure or table is corrected by publication of a new corrected figure or table as an erratum. The figure or table is republished only if the editor considers it necessary. If the colors of histogram bars were wrongly designated in the figure legend, for example, a sentence of correction would be published as an erratum; the entire figure would not be reproduced.

2.   Corrigendum

Corrigendum notifies readers that an article has been corrected subsequent to publication. It is issued by the Publisher and is used in cases where typographical or production errors (either the fault of the authors or the publisher) affect the integrity of the article metadata (such as title, author list or byline) or will significantly impact the readers' ability to comprehend the article. The original article is removed and replaced with a corrected version and a Corrigendum describing the correction is linked to it. The date the correction is made is noted on the corrected article. Corrigenda are freely available to all readers.

3.   Retractions

Articles may be retracted or withdrawn by their authors, academic or institutional sponsor, editor or publisher, because of pervasive error or unsubstantiated or irreproducible data. For example, an article’s conclusions may have been based upon faulty logic or computation, its data may have been obtained by accident from a contaminated cell line or through poor instrumentation, or it may have been derived from falsified or fabricated data. ASRJETS does not differentiate between articles that are retracted because of honest error and those that are retracted because of scientific misconduct or plagiarism. If the notification in the journal is labeled as a retraction or withdrawal, ASRJETS will index it as a retraction.

4.   Article removal

In very rare circumstances it may be necessary to remove an article from the online journal. This will only occur where the article is clearly defamatory, or infringes others' legal rights, or where the article is, or there is good reason to expect it will be, the subject of a court order, or where the article, if acted upon, might pose a serious health risk. In these circumstances, while the bibliographic information (title and authors) will be retained online, the text will be replaced with a page indicating that the article has been removed for legal reasons.

5.   Duplicate Publication

ASRJETS identifies an article that substantially duplicates another article without acknowledgement by assigning both articles. Such articles have one or more authors in common and a substantial amount of duplicated text. ASRJETS does not routinely examine articles for originality.

Note: Kindly contact the editor if you need any changes regarding your paper editor@asrjetsjournal.org

Plagiarism Policy and Claims

Kindly Check our plagiarism Policy. Notifications regarding any plagiarism issue should be directed to the editor editor@asrjetsjournal.org 

Focus and Scope

Journal's scope includes:

Academic Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS) is the International Scientific Research Journal that is intended to publish original research in all main branches of science (scientific disciplines) such as Social Sciences , Natural Sciences , Formal Sciences, and Applied science. The ASRJETS accept submissions in the following areas: (but not limited)

anthropology, archaeology, communication, criminology, education, government, linguistics, international relations, political science, sociology, Earth science, Ecology, Oceanography, Meteorology, Life science, Human biology, Decision theory, Logic, Mathematics, Statistics, Systems theory, Theoretical computer science, Applied physics, Computer science, all Fields of engineering, Accounting, , Education,  Economics, Medical Technology, Biology,  Medicine, Management, History, Mineralogy, Civil Engineering, Marine Technology, Commerce, Chemical Engineering, Animal Sciences, Petroleum & Gas, Energy Resources,  Agriculture, Medical Sciences, Machine Learning, Machinery, computer Science, Chemistry, Neural Networks, Physics, Social Science, Geology, Transportation, Waste Management, Control Engineering, Applied Mathematics, Oceanography, Biomedical Materials, Construction, Metallurgy, Neural Computing, Industrial Arts, IT, Astronology, Fire & Fire Prevention, Robotics Marine Sciences, Solid State Technology, Business Administration, Food &Food Industry, Atmospheric Sciences, Artificial Intelligence, Textile Industry & Fabrics, Education science, Physiology, Nano Science, Microbiology, Psychology, Statistics, Pharmaceutical Sciences, Genetics, Botany, Veterinary Sciences, Biotechnology, Biochemistry, Zoology, Oncology, Accounting, Entomology, Parasitology, Evolution, human behavior, Biophysics, Fisheries, Pharmacology, Geography, Cell Biology, Genomics, Plant Biology, Law, Religious Studies, Endocrinology, Dentistry, Infectious Diseases, Toxicology, Immunology, Teacher education, and Neuroscience.