Advances in Civil Engineering Materials: The Case of DPWH-Aurora District

Authors

  • Vivian Mendoza Bihasa Graduate School, Master of Engineering Management, Nueva Ecija University of Science and Technology, Cabanatuan City, Philippines
  • Rick Donald Manzon Graduate School, Master of Engineering Management, Nueva Ecija University of Science and Technology, Cabanatuan City, Philippines
  • Estrelita Bernardo Graduate School, Master of Engineering Management, Nueva Ecija University of Science and Technology, Cabanatuan City, Philippines

Keywords:

Material Advances, Civil Engineering, Infrastructure, DPWH

Abstract

This study aimed to know the usability of modern technologies and other advancements in science to facilitate the choice of materials in the DPWH Project in the District Office of Aurora. More specifically, it answered the following: (a) standard processes involved in the procurement of materials in the DPWH-Aurora; (b) advances in civil engineering materials; and (c) plan of action to facilitate the usability and utilization of these advances in civil engineering materials. The descriptive research method was used in this study, which entails collecting, analyzing, categorizing, and tabulating information about current situations, practices, beliefs, processes, trends, and cause-and-effect relationships before providing adequate and accurate interpretations of the information with or without the aid of statistical techniques. Within the scope of the study, Aurora has ten engineering offices: eight municipal engineering offices, one provincial engineering office, and the District Office of the Department of Public Works and Highways. The findings revealed that the civil engineers often employed the standard processes involved in the procurement of materials in the DPWH-Aurora while they often managed to establish advances in civil engineering materials in different projects. It was concluded that the need for a cost estimation approach that incorporates all estimation components from both kinds, including estimator-specific, design-specific, and project-specific aspects, is critical. It was suggested that Project Engineers should be utilizing common benchmarks that could aid in categorizing, grouping, and ranking cost estimation projects.

References

Cadenazzi, T., Dotelli, G., Rossini, M., Nolan, S., & Nanni, A. (2019). Life-cycle cost and life-cycle assessment analysis at the design stage of a fiber-reinforced polymer-reinforced concrete bridge in Florida. Advances in Civil Engineering Materials, 8(2), 128-151.

Villanueva, C. M. S., Mical, T. E., & Malaga, J. M. (2022, March). Minimalism and Essentialism in Manila: Architecture and Urban Wellbeing in the Post GFC and New Normal. In Advances in Civil Engineering Materials: Selected Articles from the International Conference on Architecture and Civil Engineering (ICACE2021) (pp. 31-41). Singapore: Springer Nature Singapore.

Torres, E. S. (2020). Geotechnical characterization of alluvial soil blended with quarry waste lime aggregate as an alternative roadway construction material.

Upao, H. J. (2020). The selection of ready-mixed concrete (RMC) suppliers for DPWH projects using the analytic hierarchy process (AHP).

Estrada, L. J. G., Nakatani, J., Hayashi, T., & Fujita, T. (2023). Life Cycle Assessment of Construction and Demolition Waste Management Based on Waste Generation Projections of Residential Buildings in Metro Manila, the Philippines. Cleaner Waste Systems, 100076.

Alfonso, V. C. M., Bagsit, M. B., & Reyes, J. D. (2019). Cost Impact Analysis on the DPWH Guideline and Implementing Rules on Earthquake Recording Instrumentation for Private Buildings using Multi-Criteria Decision Analysis-Analytical Hierarchy Process (MCDA-AHP) in the City of Manila. Undergraduate Thesis: Mapua University.

Mariano, D. L. D. (2019). QGIS-based materials source map of DPPWH Bulacan 2nd District Engineering Office.

Gante, D. V., Silva, D. L., & Leopoldo, M. P. (2022). Forecasting Construction Cost Using Artificial Neural Network for Road Projects in the Department of Public Works and Highways Region XI. In Modern Management based on Big Data III (pp. 64-71). IOS Press.

Ongpeng, J. M. C., Guades, E. J., & Promentilla, M. A. B. (2021). Cross-organizational learning approach in the sustainable use of fly ash for geopolymer in the Philippine construction industry. Sustainability, 13(5), 2454.

Encinares, E. S. Road Widening Projects in the Second Congressional District in the Province of Sorsogon.

Aquino, K. M. T. (2021). Incorporating Rice Husk Ash (RHA) as a partial replacement for ordinary Portland cement in Loadbearing Concrete Hollow Blocks (CHB) (Doctoral dissertation, POLYTECHNIC UNIVERSITY OF THE PHILIPPINES).

Naelgas, M. A. (2022). Standardized Equipment Management Procedures and Fleet Management of Department of Public Works and Highways Region Iv-a.

Mariano, J. L., & Estores, G. B. (2022). Seismic Response Analysis of Bongo Bridge Subjected to Multiple Support Excitation Due to Spatial Variation of Ground Motion. Civil Engineering and Architecture, 10(4).

Ongpeng, J., Guades, E., & Promentilla, M. (2021). Cross-Organizational Learning Approach in the Sustainable Use of Fly Ash for Geopolymer in the Philippine Construction Industry. Sustainability 2021, 13, 2454.

Edora, A., & Adajar, M. A. Q. (2021). Strength and permeability characteristics of expansive soil with gypsum and rice husk ash. GEOMATE Journal, 21(88), 28-34.

Getes, E. L. A., & Caingles, V. K. S. Evaluation of the compressive strength of paver blocks with the inclusion of Mangima stone and Eggshell powder. Journal of Health Sciences, 6(S3), 12044-12053.

Monjardin, C. E., & Medina, A. B. (2023). Comparative analysis of Geotechnical and Geophysical Investigations for average shear wave velocity in Metro Manila. Energy Reports, 9, 38-47.

Dacorro, J. C., & Diquito, T. (2022). Utilization of Sawdust in Making Concrete Blocks: An Experimental Research on Hollow Concrete Block’s Rigidity. International Journal of Industrial and Manufacturing Systems Engineering, 7(1), 25-30.

Marquez, K. P., Arizala, C. V. D., Soriano, V. J., Barron, J. M. G., Florece, A. E. A., Caday, J. H. B., ... & Migo, V. P. (2021). Recycled Polyethylene Terephthalate as Reinforcement Additive of Asphalt Mixture for Pavement Application. Philippine Journal of Science, 150(3), 1061-1068.

Gacu, J. G., & Sim, A. A. M. (2022). Effect of marble microparticles as an additive on the physical and mechanical properties of concrete mixes. Materials Today: Proceedings, 65, 1491-1497.

Asai, S., Goso, T., & Minagawa, M. Study on Japanese Medium and Small Size Construction Companies Expanding Business to Overseas Market.

Palacio, A. J. C., Furiscal, N. G., Abalos, K. M. L., Alferez, D. A. A., Bade, E. A., Carumba, J. J. C., ... & Santos, F. D. (2020). Study of Coconut Charcoal Powder and Egg Shell Powder as Partial Replacement to Fine Aggregates and Cement in Load Bearing Concrete Bricks. In Key Engineering Materials (Vol. 853, pp. 120-125). Trans Tech Publications Ltd.

Dollente, I. J. R., Valerio, D. N. R., Quiatchon, P. R. J., Abulencia, A. B., Villoria, M. B. D., Garciano, L. E. O., ... & Ongpeng, J. M. C. (2023). Enhancing the Mechanical Properties of Historical Masonry Using Fiber-Reinforced Geopolymers. Polymers, 15(4), 1017.

Kamal, A. A., Taguba, M. A. M., Marasigan, A. M. G., Samonte, R. M., Bata, A. N., Manhic, A. G., ... & Santos, F. D. (2020). Characterization of Alkali-Treated Banana Fiber and its Effects as Web Reinforcement on the Axial Load Capacity of Concrete. In Key Engineering Materials (Vol. 853, pp. 126-130). Trans Tech Publications Ltd.

Siriwardane-de Zoysa, R. (2020). Beyond the wall: Dyking as an object of everyday governance in the Bay of Manila, Philippines. Marine Policy, 112, 103661.

Quezon, E. T., & Ibanez, A. G. (2021). Analysis of influential factors affecting workers’ productivity on highway construction projects during the Covid-19 pandemic in the Cagayan Valley Region, Philippines. Global Journal of Engineering and Technology Advances, 6(02), 074-089.

Dhandar, B., Zuhair, M., & Bijwe, A. Study on the condition of High-Level Causeway at Naved-Darapur Road, Amaravti District.

Alejandrino, J. D., Flores, R. P., II, R. S. C., Almero, V. J. D., Lauguico, S. C., & Tobias, R. R. (2020). Structural Health Fuzzy Classification of Laguna Bridge Based on Hybrid Inspections Results. Journal of Computational Innovations and Engineering Applications JULY, 1, 8.

Zafra, R. G., Mayo, J., Villareal, P. J. M., De Padua, V. M. N., Castillo, M. H. T., Sundo, M. B., & Madlangbayan, M. S. (2021). Structural and thermal performance assessment of shipping container as post-disaster housing in tropical climates. Civil Eng. J, 7.

Downloads

Published

2023-06-22

How to Cite

Vivian Mendoza Bihasa, Manzon, R. D., & Bernardo, E. . (2023). Advances in Civil Engineering Materials: The Case of DPWH-Aurora District. American Scientific Research Journal for Engineering, Technology, and Sciences, 94(1), 1–16. Retrieved from https://www.asrjetsjournal.org/index.php/American_Scientific_Journal/article/view/9100

Issue

Section

Articles